Citroen XM Stop Lamp repair

thingiverse

I spent over a year developing this, so consider supporting my work through "Tip Designer" button. This is a permanent fix that's working in my car for a while now. It's a 4th edition. It already fixed some lamps. I was using 2 3D technology for the print: 1. 2x cap - MSLA (any black resin) 2. base - ABS/ASA What else do you need? - 2x 3x10 bolt (I have used back, but it shouldnt matter) - 2x 3x25 bolt to mount light - 4x m3 inserts - 3,5x16 screw - Loctite HY 4070 (the only one that worked for me) - IPA - Carpenter clamps - 3mm drill 1. Sand and clean the surface of the lamp 2. Measure the printed base to the clean lamp. Check if it fits correctly. 3. Glue together every broken part of the lamp 4. Glue the base to the lamp. Mounts for the lamp drives the placement of the repair base. 5. Use clamps for the time of glueing together. Wait for appropriete time. 6. Loose clamps, Put inserts into cap sockets and the holes where you mount the lights. 7. Use 25mm screw to attach the light to its black cover (if its not possible, drill it with 3mm drill). 8. Attach a lamp to the car. NOTE: You don't have to break original mounting if it still exists.You can use it. You would be able to use a new one if it breaks. 9. Put a cap to the hole in the top cover and screw it with the 3x10 screw. ENJOY!