Ciclope Chimera Support Kit (Extruder Fan & Light) - Geeetech I3 Pro B/C

thingiverse

Support for the Chimera or Cyclops extruder on Geeetech I3 Pro B/C printers. For assembly, you will need: - 2 M4 x 10 socket head cap screws or countersunk screws; - 2 M4 washers; - 3 M3 x 10 socket head cap screws or countersunk screws; - 3 3mm spacers. Remove the original extruder support and attach the new one to the carriage by inserting the two M4 washers into the internal seats first. Use the three M3 socket head cap screws with a slot for attaching the extruder. For the cooling fan of the extrusion, refer to: https://www.thingiverse.com/thing:2055980 https://www.thingiverse.com/thing:803045 For the combined cooling fan and LED light support, I took inspiration from thing 803045 and reworked it. For its assembly, you will need: - 4 M3 x 16 socket head cap screws or countersunk screws; - A 40x40mm fan; - 4 M3 x 25 socket head cap screws or countersunk screws; - A high-luminosity white LED of mm5; - 1 resistance with a suitable value to be connected in series with the LED, so that it can be powered at 12V. The hole on the top serves as a passageway for the power supply wires of the diode LED. N.B.: For printing the fan and light support, use a resolution of 0.1mm and employ supports. The project files for FreeCAD are included in the zip file.