Chromecast w/ Google TV Remote sleeve and Tile sticker

prusaprinters

<p>This is a remix of torystark's model over on Thingiverse.</p><p><a href="https://www.thingiverse.com/thing:4825994/files">https://www.thingiverse.com/thing:4825994/files</a></p><p>&nbsp;</p><h3><strong>Description</strong></h3><p>&nbsp; The model is great on its own, but we needed a way to find the remote when it disappears in the living room. This uses a Tile sticker in the base to find the remote when needed. I am also setting up my google Home speaker with the tile service. There's the added bonus as it also makes it a little bigger in the hand. I have included a hole in the bottom to help release the Tile when the battery dies.&nbsp;</p><p>&nbsp;</p><p>&nbsp; When I was searching for a model I found other posts asking about the Apple Airtag as well. I do not have an airtag or Apple devices for that matter. I have posted the model without the Tile hole in case someone wants to add it, or just wants an extension to the remote.&nbsp;</p><p>&nbsp;</p><h3>Printing instructions</h3><p>Layer height: 0.15</p><p>Infill 15%</p><p>Supports: Yes (on build plate only)</p><p>Orientation: Print on open face</p><p>Filament: SaniSmart TPU (uses PrusaSlicer profile)&nbsp;</p><p>Fan speed: 100%</p><p>Support Material Overhang threshold: 10</p><p>Skirt loops: 0</p><p>&nbsp;</p><p>&nbsp; Without the supports I had some really bad overhangs. This created quite a bit of drooping on the inside bottom of the sleeve. I used paint on supports to help limit where the supports were generated. Otherwise they were filling in the volume and IR blaster holes, and extending onto the lip that covers the base of the remote. The supports came off with a small bit of force and cleaning off any remaining with needle nose pliers.</p>