Chrome Dino with base

prusaprinters

Chrome dino with base to stand on Credit to Andrew Bell / Dead Zebra Dino Set Print instructionsLayer height: 0.15mm (max 0.2)Infill: 10-20% RecommendedGoogleDinos_extended.3mf and GoogleDinos_base.3mf should be printed together. I recommend to use a different color for each one. (You could also use GoogleDinos_base_through.3mf if you want the parts to stick through to the bottom)The parts should fit without using glue.Layer height: maximum 0.2mmInfill: 10% If you already printed the model by ThanythGoogleDinos_base_shallow.3mf should be printed if you already have the original print by Thanyth. You will need to use some glue or resin to attach it, make sure it's the right kind of glue for your material. If you are not going to touch it much even glue stick would work. You could also use GoogleDinos_base.3mf if you don't mind that the Dino feet are not as visible.