Christmas tree

prusaprinters

A little Christmas tree! Lights can be printed in multiple color or can be painted . It can also be turn into a lamp by printing transparent light with 2 wall and no infill and adding led at the bottom of the tree. A remote led puck  hot glued in the base would do the trick.  Parts should to be glued in place.  I've printed 3 sizes 100%, 95% and 50%. Alll in pla.                 Layer height 0.12 and 0.1wall: 4 (100%) and 3(50%)Infill: 20%support:     - Star = Yes      - Tree = Only the bottom of the tree. Up to the end point of the first and largest batch of               branch.  Brim:  Yes  (optional for the cap) Printed each color of light by batch of 7 ( there is 44 light) and  the Star by batch of 3 to give cooling time and better chance at getting one with perfect tips. Bottom tips are stuck on support and can a bit more fragile depending on filament! Having a few extra lights printed of each color gives you a chance for variation in the placement. And if you displace one your still in business! They like to bounce on the floor and then disapear. So big warning: The christmas elfs love them!