Christmas Tree 3D Printing Style

thingiverse

I've been working on this project for three days in advance of Christmas, a simple tree with decorations made from filament rolls and a recreated E3D extruder at the peak. I designed it to test all the filament colors I bought this year and see the results. You can donate me via PayPal if you like this model and want to support my work: https://www.paypal.me/JordanHogetoorn Print Settings: Printer Brand: RepRap Printer Model: Anet A6 Rafts: No Supports: Yes Resolution: 0.15mm Infill: 30% Temps: I used one temperature setting for all parts and filaments. Extruder (hotend): 220°C Hotbed: 60°C For speed, I used the following settings: Amount Needed | Filename | Speed 8 | Leaves.stl | 2000mm/min 3 | Leaves_Frame.stl | 1000mm/min 1 | Peak_Extruder_Part1.stl | 1250mm/min 1 | Peak_Extruder_Part2.stl | 1250mm/min 16 | Spool_Filament.stl | 2000mm/min 32 | Spool_Left.stl | 1000/min 32 | Spool_Right.stl | 1000mm/min 1 | Stand.stl | 2000mm/min Design Process: I created this project fully in Fusion360 and exported all files to STLs for printing with Simplify3D. Custom Section: Filament Used: I used a variety of colored filaments. I chose one brand because it's a good quality filament that works well with my 3D printer, and it's also very affordable. Here are the details on each filament used: Leaves.stl: 123-3D Apollo Series PLA 1.75mm Nuclear Green Leaves_Frame.stl: 123-3D Apollo Series PLA 1.75mm Red Peak_Extruder_Part1.stl: 123-3D Apollo Series PLA 1.75mm White Peak_Extruder_Part2.stl: 123-3D Apollo Series PLA 1.75mm White Spool_Filament.stl: 123-3D Apollo Series PLA 1.75mm Red, Magenta, Blue, Nude, Orange, Yellow, Gold, Purple Spool_Left.stl: 123-3D Apollo Series PLA 1.75mm Gray Spool_Right.stl: 123-3D Apollo Series PLA 1.75mm Gray Stand.stl: 123-3D Apollo Series PLA 1.75mm Gray