Christmas present props

thingiverse

Outdoor Christmas presents under my small front porch tree light up with festive flair. I use CA glue to assemble these unique decorations, no high-precision snap-together parts needed here. The white box segments are identical for both presents, just oriented differently. Printed ribbons feature 3 top and bottom layers with 0% infill, solid white PLA for the boxes and translucent PLA for the ribbons. A 4mm corrugated plastic sheet serves as the base. Diffusers in the square box come from a design found on Thingiverse (https://www.thingiverse.com/thing:2550235). To assemble the tall presents, print these parts: four or one corner piece, mybox1, mybow1a, mybow1b printed on the side with 0% infill, three myribbon1a, myribbon1_cord, pixel_ring1, four standoff_35mm, and four coroplast_clip_to_pla. For the low presents, print these parts: four or one corner piece, mybox1, mybow1a, mybow1b printed on the side with 0% infill, three myribbon1_alt_side, myribbon1_alt_side_cord, two myribbon1_alt_top, pixel_ring1_alt, four standoff_15mm, and four coroplast_clip_to_pla. Also included are 123D-Design files for making custom variations.