Chimera Part Cooler 30mm30mmfans

thingiverse

A simple Chimera part cooler designed for ease of installation and wide printer compatibility. Ver A was printed and tested on a FLsun i3 clone. Since it mounts directly on the heatsink fan, it should be compatible with almost any printer using the chimera hot-end. Please note that the orientation of heat-blocks is shown in the images. I insulated my nozzle with some Kapton tape. The second fan was taken from a V6 (clone) and the screws provided were self-tapping into the cooler. I decided to shorten the "nose" and angle the air flow down slightly in Ver B, but Ver A is working well for me, so I have yet to print or test Ver B. Left as WIP because I only use one side of the Chimera and Ver B hasn't been tested. The hot-end model, e3d_cyclops_asm.stp, was provided by Chris and can be found here: https://grabcad.com/library/e3d-cyclops-1 The 30mm fan, 30X30X10 DC fan.step, was designed by Phil Maddox and can be found here: https://grabcad.com/library/30mm-dc-fan-1