Chimera mount for CR10S

thingiverse

I wanted to upgrade my CR10s to a MKS based dual nozzle printer. At first, I tried using this mount from @XThunder50. Link to XThunder50's CR10s Chimera mount <https://www.thingiverse.com/thing:3867193> My heat sink was reaching 70 degrees Celsius, so I had to print the mount from a PET CF because it can resist a higher temperature than the previous materials I tried using before. (I attached some pictures in the folder, just take a look.) So, I got rid of one problem with a higher-temp material, but the issue was that my heat sinker was getting too hot and making my filament soft way before it reached the heat zone. So I decided to keep XThunder50's mount and make a few adjustments for my blowers and fans. I got awesome results printing this model with PRO1 from Ultrafuse. The model needs supports, but if you orient the part with the big fan mount facing the build plate, you'll have less trouble removing the supports, IF you use "tree support" option from Cura slicer. In the end, I didn't want to assume any risks about the worn-out condition of the mount or the heat from the blockers damaging the fans' exhaust. So, I printed it on Formlabs 3 with High-Temp Resin V02. I attached some pictures with the mount not fully assembled, but you'll need: 2x20mm FANS 1x40mm FAN 1xBrushless 4010 blower FAN 1x5015 Brushless FAN (This FAN cools only the back zone where the stainless steel barrel is fixed in the heat sinker. It's mounted on top of the mount because my 5015 already had a different mount because I took it from a normal printer. The size of the 5015 will be fixed on edge, and you'll need a mount for them. I'll upload one soon!) Since it's a mount for a dual extruder, I also attached the files for a dual color print (If someone wants to play with ABS, feel free to do it, and if possible, please show me some pictures.) Kind regards, Vlad