Child Lightsaber - rattle(optional) custom prop lightsaber type thing

prusaprinters

<p>Quick custom made lightsaber prop for a child, this is a remix of the matching fullsize version(they were actually both made at the same time so neither is really a remix).</p> <p>Full size here - <a href="https://www.prusaprinters.org/prints/40289-lightsaber-custom-prop-lightsaber-type-thing">https://www.prusaprinters.org/prints/40289-lightsaber-custom-prop-lightsaber-type-thing</a></p> <p>You could just scale down the adult version however the proportions look wrong when made smaller in order to fit in a childs hand so modified proportions.</p> <p>Not based on any specific design. Primarily designed to be easy to print.</p> <p>openscad file I used to create is included(BEWARE the scad file should not in anyway be used as reference of what a "good" design should look like; it was a major rush)</p> <p>Prints as one piece the emitter should be printed touching the bed; there is no support needed and no bridges created if printed this way.</p> <p>I printed with no infill and 5/6 perimeters; this was to allow me to pause the print partway through and add some beads so once finished it acts as a rattle.</p> <p>For an easier/faster print then 10-15% infill and 3 perimeters should be fine.</p> <h3>Print instructions</h3><p>Prints as one piece the emitter should be printed touching the bed; there is no support needed and no bridges created if printed this way.</p> <p>I printed with no infill and 5/6 perimeters; this was to allow me to pause the print partway through and add some beads so once finished it acts as a rattle.</p> <p>For an easier/faster print then 10-15% infill and 3 perimeters should be fine.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong> Creality</p> <p><strong>Printer:</strong> CR-10 Mini</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.1</p> <p><strong>Infill:</strong> see</p>