Chevy SB Receiverbox for Axial Wraith

thingiverse

You can upgrade your stock receiver box on your Axial Wraith with this awesome Chevy SB V8 receiver box. It's specifically designed to hold a high-end RC-Receiver measuring up to 55mm x 26mm x 16mm in size. I've broken down the "bolt on" parts of the engine, allowing you to print them separately in different colors for added visual appeal. The printed parts can be easily glued together once completed. Be advised that some parts are notoriously tricky to print, including Kabelstrang.stl and Einspritzleiste.stl, so I've included a specialized holding structure that you'll need to combine with your slicing software's support structure. As for Zuendkabel.stl, it's simply not feasible to print using my Ultimaker 2. Feel free to use any material of your choice when printing the parts, and I personally prefer PLA for its high quality finish. To add a realistic touch, you can print the serpentine belt (Rippenriemen.stl) using flexible PLA. To mount this awesome Engine Model on your Wraith, you'll need to remove the existing RC-Box, upper crossmember, lower crossmember, and plastic plug where the slipper spring is adjusted. Then carefully pack your receiver into the engine block and screw on the Transmission bellhousing (use 3x12mm screws with thread for plastic). Once that's done, simply place the engine in the Wraith's engine compartment and secure it using the lower crossmember bolts. Finally, reinstall the upper crossmember, and you're all set! For more upgrade options like a blower or carburetor, be sure to check out my homepage. The last two images showcase some impressive Upgrades for the Receiver box, which can be found on my homepage: https://www.printable-3d-models.com/en/3D-printable-designs/rc-upgrades/upgrading-chevy-smallblock-receiver-box.