Chevy SB Receiverbox for Axial Wraith

youmagine

Now you can upgrade your stock receiverbox of the Axial Wraith with this cool Chevy SB V8 receiverbox. The new box can hold an RC-receiver with maximum dimensions of 55mm x 26mm x 16mm. I have separated the "bolt on" parts of the engine, giving you the ability to print the engine parts in different colors. After printing, the parts can be glued together seamlessly. Some parts are particularly tricky to print, such as Kabelstrang.stl and Einspritzleiste.stl, which is why I have provided a holding structure for these parts that must be combined with your slicing software's support structure. The part Zuendkabel.stl is unfortunately impossible to print on my Ultimaker 2. You can choose any material you like to print the parts (I prefer PLA). I used flexible PLA for the serpentine belt, which is the Rippenriemen.stl part. To mount the Engine Model on your Wraith, delete the existing RC-Box, upper and lower crossmember, and plastic plug where you can adjust the slipper spring. Then pack your receiver in the engine block and screw on the Transmission bellhousing using 3x12mm screws with a thread for plastic. Next, place the engine into the engine compartment of your Wraith and screw it on with the bolts of the lower crossmember. Reinstall the upper crossmember and you're done! The last two rendered pictures show some upgrades for the Engine Block that are not part of this database but can be found on my homepage at http://www.printable-3d-models.com. Have fun with this kit!