Chest of Boxes

thingiverse

This design is optimized for cutting on an 8"x12" bed k40 laser cutter. If you need uncut versions of these items, look for the "raw" drawings available; they can be used with a larger laser bed or to make modifications. Additionally, there are dovetail designs that fit within my laser's constraints. To assemble this project, two types of wood are required: 1/4 inch birch plywood (4.5mm) and Utility Plywood (2.7mm). I have four-by-eight sheets cut into individual boards, yielding a total of 48 per sheet. To complete the project, you will need twenty-two 8"x12" sheets of birch plywood and twenty-five 2.7mm plywood sheets for the interior of the small boxes. The components needed include six shelves, six sides, one back plate, and twenty-five drawers. Two small drawer box drawings are available: one is slightly shorter to accommodate hook-loop tape, while the other will fit flush without it.