Cheeky Santas Mk2 Collection

thingiverse

I've created an updated version of Santa, now including Mrs. Santa and Rudolph, which I'm calling Mk2. Hopefully, this will be the final version! For more information about its construction, please refer to the original Cheeky Santa file. The earrings feature Santa and Mrs. Santa, loaded into Cura and resized to 40mm high. They were printed at a layer height of 0.2mm with 0% fill in skin-colored PLA. The loop at the top is drilled at 1mm, allowing them to be printed left or right-handed or one of each. Tree decorations consist of Santa and Mrs. Santa, also loaded into Cura and resized to 80mm high. They were printed at a layer height of 0.2mm with 0% fill in skin-colored PLA. The loop at the top is drilled at 2mm, enabling them to be printed left or right-handed or one of each. The cake decoration / topper features Santa and Mrs. Santa, loaded into Cura and resized to 70mm high. They were printed at a layer height of 0.2mm with 0% fill in skin-colored PLA. They can be printed left or right-handed or one of each. Rudolph was loaded into Cura and resized to 55mm high to match Mr. and Mrs. above. He was printed at a layer height of 0.2mm with 5-10% fill in brown PLA. I recommend not printing him any smaller, as the antlers will lose definition. Rudolph has built-in supports for his tail, neck, head, and antlers, eliminating the need for additional support material. Mr. Santa originated from this file: https://www.thingiverse.com/thing:34866 Rudolph started life here: http://www.thingiverse.com/thing:5352 Print Settings: Rafts: No Supports: No Resolution: 0.2mm Infill: 0% - 10% Notes: Mr. and Mrs. Santa must be printed on a brim for stability, while Rudolph requires a brim to keep the supports in place.