Channel Slot

grabcad

Steps Took:1. Created a rough outline of the side profile using the line tool and added dimensions for width.2. Extruded to the width of the part.3. Used the extruded cut and mirror tool to create the two cuts on either side of the main block, then used a reference plane to mirror the cuts to the opposite side of the part (in hindsight, I should have used a midplane on the first extrude).4. Created the slim corner cut at the rear of the part.5. Used the extruded cut and sketch mirror tool to create the straight slots through the channels.6. Used the extruded cut tool to correct the size of the two blocks at the front.7. Added the fillets to the straight slots.8. Applied material properties.