Chain

prusaprinters

<p>As for some reason I hate to print with support I designed this chain link.</p> <p>To print a chain work like this:<br/> 1) print some separate chain links<br/> 2) again print some chain links but this time upright and at the correct distance from each other<br/> 3) when the print 2) is half way put the separate chain links over those being printed now.<br/> =&gt; you have 2 possibilities, do this while your printer is busy at the other side of the bed or have your printer stop for example with the change filament command (if supported: M600)<br/> 4) start over with 1) until your chain is long enough.</p> <h3> Print Settings</h3> <p><strong>Printer:</strong></p> <p>Delta Rocket</p> <p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div><strong>Supports:</strong></p> <p>No</p> <p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div><strong>Infill:</strong></p> <p>15%</p> <h3> How I Designed This</h3> <p>designed in Sketchup</p> </p></p> Category: Other