![Chain [strong, print in place]](https://cdn.thingiverse.com/assets/37/06/b8/a3/f1/large_display_54debb4f-e6b8-4d71-967f-3b91153b0080.png)
Chain [strong, print in place]
thingiverse
Chain [strong] Print in place. Supports are only needed for the closure areas (use supportblockers for the rest). Use 0,2 mm layerheight 20% infill is ok, more will make it even stronger. Will fit around sth. with 180 mm circumfence e.g. a wrist.Just connect two of them to double the length, may fit around the neck. Elements are 12 mm thick. Scale to your needs, but I recommend to let the z-factor untouched, since this affects the necessary z-gap. Once the pressfit-pin closes the chain, it will be hard to find it and open it again. Use some glue to make it permanent or a padlock to create a pair of Handcuffs. Have fun!
With this file you will be able to print Chain [strong, print in place] with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Chain [strong, print in place].