Chain Chomp Dual Extrusion 4 Color

thingiverse

Peach's Chain Chomp Aka Bow Wow Printable in 2 Colors with Pauses for a 4-Color Effect Print this model on a machine that prints two colors at a time, pausing between layers for a 4-color finish. It also looks great in just two colors. Printed in One Piece on a Two-Nozzle Machine This model can be printed in one piece using a two-nozzle machine with no support needed. For a four-color version, you'll need to change filaments twice during the print process. Printing Settings for Both Machines To print this model, use the following settings: 0.4mm nozzle and 0.125mm layer height. Print the black part at 3 shells with 20% infill, while the secondary model requires 5 shells and 30% infill to include the chain. Changing Filaments for a 4-Color Model To print this model in four colors, pause the printer at specific heights to change filaments. Be cautious when selecting the layer to pause on, as some areas have no tolerance in either direction. My Color Layout and Layers to Pause At Here's my color layout and the layers where I paused the filament: 1. Start with black and non-shiney silver. 2. After the chain but before the tongue, print with black and red. 3. After the tongue but before the teeth (a picky spot), print with black and white. Note: The teeth and eyes must be the same color.