CH Products Hotas Table Mount

thingiverse

I didn't want the Joystick and the Throttle taking up space on my Desk, so I built a Simple yet sturdy construction for mounting my HOTAS to my table. It's very easy to take those mounts off and set them aside. For the Dimensions I used, please view the Images. Since the CH Products HOTAS has no Mounting Screws, I used some Cable Ties to keep them in place on the Mounting Plate. For the Prints you need a 200x200mm Print Bed! There are Build in Supports for better Printing Results. +++++ Updates +++++ 05/25/2018 Added A Grip Piece to mount on the M8 Screw Head for better stability. It's a tight fit, so you need to heat the Hex Head of the screw and press it gently into the printed part. Here is what you need to build your own: (Links are exemplary) 2x 32mm Toggle Clamps (https://aliexpress.com/item/32mm-Plunger-Stroke-Metal-Push-Pull-Toggle-Clamp-227Kg-500-Lbs/32753112723.html) 12x 2020 L Connectors (https://aliexpress.com/item/10PC-T-slot-L-type-90-degree-EU-standard-2020-aluminum-profile-Inside-corner-connector-bracket/32799109924.html) 2x 500mm 2060 Aluminum Extrusion Profile [or more depending on your measurements] (https://aliexpress.com/item/2060-aluminum-extrusion-profile-european-standard-length-500mm-aluminum-profile-workbench-1pcs/32830372532.html) 40x M4 T-Nuts (https://aliexpress.com/item/10PCS-M5-Hammer-Nut-Aluminum-Connector-T-Fastener-Sliding-Nut-Nickel-Plated-Carbon-Steel-for-2020/32623642406.html) 56x M4x10 Allen Bolts (For Corner Brackets and Plates) 8x M4x40 Allen Bolts (For Toggle Clamps) 8x M5 Washers (For Toggle Clamps with M4 Bolts) Mounting everything together should be pretty self-explaining. Tablet Mount is Optional and requires 1x M4x10 Bolt, 1xM4 Washer, and 1x T-Nut There is a Mounting Diagram by nfearnley in the comments. Have fun Printing!