cetus skr mini e3 and rpi mount

thingiverse

klipper conversion for Cetus printer. Adapter holds an skr mini e3 v2 and a pi 0. I connected them via uart not usb. you can skip clipper and just run marlin if you want. my current config file is attached. You will likely need to adjust offsets for x,y,z, probe. Should be faster than just figuring it out as i did. The attached config file uses a bidu h2 extruder. I have posted stl files to attach that as well on thingiverse. If your using the stock extruder the mm per rev is around 40 I think. I decided I hated the stock extruder and threw it away after clogging another nozzle and seeing that it was going to cost $40 to get more with a month shipping delay. The printer will also be silent after this which is a bigger deal than you might think. My wife no longer complains about it.