cellphone stand with gaps

prusaprinters

<p>A remix of <a href="https://www.thingiverse.com/thing:1938639">https://www.thingiverse.com/thing:1938639</a> which is a remix of <a href="https://www.thingiverse.com/thing:1387260">https://www.thingiverse.com/thing:1387260</a></p> <p>I wanted a stand where I could charge while using. <a href="https://www.thingiverse.com/thing:1938639">1938639</a> did work, but only at a shallower angle than I liked. So I added a second hole for use when the phone is closer to 90°.</p> <p><a href="https://www.thingiverse.com/thing:1387260">1387260</a> has great photos of all the way the stand can hold the phone.</p> <p>As you can see, the stand works great, portrait or landscape. You can charge while in portrait mode with the phone tipped, or vertical if you have it at the edge of a near eye-level shelf.</p> <h3>Print instructions</h3><p>Unassociated tags: mobile phone</p> <h3>Category: Mobile Phone Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2rqZ6Uo">i3 MK3</a></p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.15mm. Standard 0.4mm nozzle</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Filament:</strong> Amazon Basic PLA Black<br/> <strong>Notes:</strong></p> <p>Supports everywhere. Use a brim.</p> <h3> How I Designed This</h3> <p>I uploaded <a href="https://www.thingiverse.com/thing:1938639">1938639</a> to <a href="https://www.tinkercad.com/things/0eEbbNv8nQG-cellphone-stand-with-gaps">tinkercad</a> and added a cylindrical hole. Then, I used meshmixer to repair the mesh. That's the version here.</p> <p>Just like the .stl file here, you can grab the <a href="https://www.tinkercad.com/things/0eEbbNv8nQG-cellphone-stand-with-gaps">tinkercad project</a></p>