Celestron AVX leg leveler

thingiverse

Leg Levelers for the Celestron Advanced VX Mount. This slips over existing foot, featuring a divot at bottom to center foot in tube. No modifications required and fully reversible. What to Print: 3 x Foot 3 x Thumbwheel 6 x Retainer Shim Designed with these feet or similar in mind. https://www.amazon.com/gp/product/B07GL1VQSG/ 3/8" - 16 screw. 4.5" high, 2" diameter. Easily lifts fully loaded mount with just thumbwheel. I used the jam nut inside foot to provide hard threaded surface for screw to bear on. Thumbwheel slips over shaft and onto adjustment nut at bottom of screw, fitting snugly. Easiest way to put feet on is to assemble everything loosely at foot, ensuring it's snug against bottom and centered. Slide retainer clips in until they're even and snug. Then slide whole assembly firmly into leg clamp like a slide hammer. A few moderate whacks will have clamps firmly and evenly seated. If you want to remove feet, it's easily done with dead blow hammer without damaging parts.