Ceiling Microphone Mount

prusaprinters

<p>This simple mount enables you to hang a microphone under a ceiling or balcony using a microphone clip equipped with a standard 5/8 inch, 27 threads per inch hole. Conversely you can use on a table or other horizontal surface. Use on a vertical surface is not recommended since there is not a method to stop the microphone clip rotating under gravity.</p><p>The clip can be attached to the surface using 4mm dia wood screws. As an option, a 20mm wide strip of foam tape can be used between the mount and the surface to help damp vibrations.</p><p>The thread is fine and needs a good quality printer. However, the metal threaded insert in microphone clip will help clean out the thread - must make sure you don't cross thread it!</p><p> </p><p><strong>Update</strong></p><p>Version 2 added.  This includes a provision for a printed locking ring so that the mount can be used on a vertical surface with most reasonable weight microphones.  The V2 mount is longer with a higher percentage of thread to accommodate the ring.</p><p>Before assembling the ring and the mount, use a microphone clip with a metal insert (preferably brass on the mount to clear the threads and a metal reducer insert on the ring.  When you screw the ring onto the mount, use lubricant - I used a smear of washing up liquid.  It will be tight the first time you screw it on.  After that it should ease up.</p><p> </p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p> </p><p><strong>Printer: </strong></p><p>I3 MK3S</p><p><strong>Rafts:</strong></p><p> </p><p>No</p><p> </p><p><strong>Supports: </strong></p><p>No</p><p><strong>Resolution:</strong></p><p> </p><p>.15mm</p><p> </p><p><strong>Infill: </strong></p><p>20%</p><p> </p><p> </p><p> </p><p> </p><p>Category: Audio</p>