CD Shelve

prusaprinters

<p>Need a CD wall holder and don't want to pay $30 or $40 for one? I got you covered !</p> <p>You can print on any quality you would like. I printed it at Quality .3 ( Draft ) with 30% infill in PLA. For the rods I purchased a ¼ x 48 in aluminum round bar ($6) and cut it in half. That gave me a 2ft CD wall holder that can hold about 60 CDs (give or take one).</p> <p>Note you can buy any round rod that is ¼ some are stronger than others. I bent my rods up a bit in the middle to counteract middle sagging.</p> <p>If you want the rods a specific color you can paint them any color you would like (I applied two coats of white spray paint and sealed it with two clear coats).</p> <p>For mounting screw size please check the screw photo for dimensions you will need 4 screws.</p> <p>For the holes I had extra white caulking laying around so I used that to fill the screw holes to have a bit of a cleaner look.</p> <p>Lastly this holds any media that is longer than 146mm in depth (I currently have only tried CDs)</p> <p>Thanks for checking out my work and have an awesome time printing!</p> <h3>Print instructions</h3><p>This was printed at Quality .3 ( Draft ) with 30% infill in PLA</p>