CBU student project 1 - phone holder parts

thingiverse

(https://www.printables.com/social/292924-justin/prints) Please use the 3D printers in the library to print your model and bring it to lab TC133 to complete. Instructions on how to book library 3D printer and use them are found on the library website (https://libguides.cbu.ca/c.php?g=725379). The detailed steps below for this assignment are: 1. Go to Library Website (https://libguides.cbu.ca/c.php?g=725379) and watch the 3 videos on on 3D printing (26 mins total) 2. Download all the model files from here on thingiverse 3. Add all the parts to prusaslicer and slice the files for 3D printing. The units of this model are mm, the material is PLA, use 4 perimeters/walls, brim width is 4mm and distance from object is 0mm. Use 20% infill. Correct orientation of parts will enable you to print them with no support material. You can print all the parts at the same time. All these settings can be found under the simple print settings options. Set print settings layer height to 0.20 mm Speed. 4. Using your USB stick export the sliced file to it. (you must provide your own USB drive for this assignment 5. Book 3D printer including noting the grams of filament used on CBU library 3d printing page link above. You will find the grams of filament used and print time after you have sliced your file. 6. When it is your turn to print, clean the print bed with alcohol wipe. 7. Once print has started check that the first layer of 3D printing goes well before you leave to do something else 8. When print is complete pay for 3D printing at the library main desk and ask for a receipt. You need to bring the receipt to your lab in TC133 along with your 3D printed parts.