CATCH HANDLE FOR DJI MINI 3 PRO AND MINI 4 PRO

thingiverse

I use the handle for taking off and landing the DJI Mini 3 Pro and DJI Mini 4 Pro. I designed the handle because we wanted to film a sailboat during voyages, and we had mainly problems with landing the drone on board.The handle is mounted in the center of the drone. The clamp around the drone is tightened with a screw and a nut (M4 x 20 mm or M4 x 25 mm). For better fastening, I glued a self-adhesive thin window seal inside the handle.When flying with the handle, two things are important. Fly with the drone's sensors turned off in sport mode (the handle interferes with the sensors and reports an error). Start the drone at a height around shoulder level. When landing and catching, the drone remembers the height from which you started and does not want to descend lower.Using the handle on the drone is solely your decision, and I do not take responsibility for any potential damage.Drone:DJI Mini 3 ProDJI Mini 4 ProAdditional materials:Screw M4 x 25 mm or M4 x 20 mmWindow seal with a thickness of 1-3 mm