Catan Bank

cults3d

This is a bank and card dispenser for the following game pieces of Settlers of Catan. Settlers of Catan resource tokens Opening is cut all the way to the floor to make removal of the pieces easier Catan Development Card Tokens scaled down to 70%. Push the button on the back to dispense a card Catan Score Keeper & Resource Holder Holds the Longest Road and Largest Army score markers on the front The lid is held in place by tabs. Place it directly over the tray and push straight down. Sometimes it take a little shake to get it to snap all the way into place. To get the cards inserted without making a mess, you'll need to have the lid on. Place the cards in the sleeve and flip the bank upside-down. Slide the sleeve in until it snaps into place. I based it on the box that comes with Jenga. Post-Printing You'll need: 2- m3 x 15mm screws (Holds button in place) 1- 6mm x 35mm spring (Button) 2- m4 x 5mm screws and nuts (Attaches Handle to lid) To install the button, you'll first need to clear away the sacrificial layer of plastic in the holes that come up through the bottom. I have a small, round file that works perfectly for this. Drop the spring in it's hole and insert the button. Holding the button down, screw the m3 x15 screws all the way in from the bottom. Slide the pusher in from the front so the notch comes out the small backside hole Put a drop of super glue in the button's notch and attach the pusher