Caster Replacement Body

prusaprinters

<h4>What you need</h4><p>Apart from the 3d printed parts you reuse some parts of the stock caster / castor wheel</p><h5>Original Parts</h5><ul><li>axle: ~ 30 x 5 mm</li><li>2 wheels: 35 x 7,5 mm</li><li>pin: 6 mm diameter top, 7 mm diameter bottom</li></ul><h5>Printed Parts</h5><ul><li>caster body</li><li>2 washers</li></ul><h4>Printing</h4><p>Material: PLA, ABS, PETG - I used PLA and it seems to work great</p><h4>Assembly</h4><ol><li>push the pin into the caster body</li><li>put the washers on the axle</li><li>slide the wheels on the axle - one from each side</li><li>click the axle-washer-wheels assembly into the body</li></ol><p>Pin and axle need to click into place. You may use a hammer to insert the pin.</p>