Case for ZWO ASI290MC

thingiverse

This is a case to store the ASI290MC imaging camera with the 1.25" nose-piece attached and the USB3.0 cable wrapped up neatly. I've secured it in the case so that I won't have to remove the nose piece every time I want to put the camera back into its original box. When printed at a layer height of 0.15, the lid will fit perfectly and the case can be lifted by the lid, while the bottom will only slowly slide out. I've added foam padding made from the original box's foam for extra protection. The case is designed to hold other similar cameras from ZWO, with dimensions as follows: Inner diameter (where the camera sits): 64mm Height (including a 5mm layer of foam padding): 70mm There's also a version of the lid available without logos for single-color prints. To print these parts in single color, use the following files: - bottom_asi290mc.stl - top_single.stl For prints with logo, use: - bottom_asi290mc.stl - top_asi290mc.stl - all other letters and numbers with _asi290mc.stl in their names Refer to print settings for detailed slicer settings.