Case for RigExpert AA-30.Zero HF Antenna Analyzer
thingiverse
This case is designed to safeguard the exceptional RigExpert AA-30.Zero HF Antenna Analyzer (0.06 to 30 MHz), which also features a Moyina FT232RL USB to TTL serial converter that functions perfectly with AntScope, AntScope2, and for updating the AA-30.Zero firmware. To ensure secure attachment of the USB converter, a sturdy mount is required, so I added a well and clamps to keep it firmly in place. The well was sized to provide a friction fit for the 27.0mm x 47.5mm Moyina circuit board. Although the clamps may grab smaller boards, some sanding might be needed to accommodate larger ones. To prepare the Moyina FT232RL USB to TTL serial converter for installation, I removed the supplied header and made soldered connections since it would be housed in a case. To enhance clearance between the AA-30.Zero and the switch nub, I trimmed it down to about 1mm, reminding users that it must be set to 5 volts. The clear filament allows visibility of the AA-30.Zero's blinky lights. The USB converter circuit board clamps are secured with M3x6 screws, while M3x12 screws hold the case together. More information on the RigExpert AA-30.Zero can be found at https://rigexpertusa.com/aa-30-zero/, and details about the Moyina FT232RL USB to TTL serial converter are available at https://www.amazon.com/dp/B075N82CDL.
With this file you will be able to print Case for RigExpert AA-30.Zero HF Antenna Analyzer with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Case for RigExpert AA-30.Zero HF Antenna Analyzer.