Case for Raspberry Pi Zero W (No Header) optionally with heatsink fitted.

thingiverse

This is a simple case designed to protect a Pi Zero W (WITHOUT the header fitted). The case is in two parts - a Base, and a Top - pretty self-explanatory - and is held together using 6mm long M2.5 screws. The screws are inserted through the Base and screw into the holes in the unterside of the Top - these may need clearing out with a 2mm drill bit before assembly if the printing isn't precise. Two versions of the top are provided - one plain and one with a cutout for a heatsink to be fitted. Please note that this has been designed around the Zero W - the cutout for the heatsink is in the wrong position for the earlier versions of the Zero. The design was prompted by the apparent lack of case designs that leave enough room to plug stuff into the ports on the board; because the components of this case follow the contours of the board, access to all of the ports is possible without interfering with different designs of plug, and the case protects the SD card from accidental damage. See also my design for a Pi Zero W with a HifiBerry DAC+ Zero attached - https://www.thingiverse.com/thing:4527114