Case for 4-1 Retro Game Console Kit HU-001 SH00108

prusaprinters

This is an easy-to-print case for the DIY retro-gameconsole, like the one here: https://www.roboter-bausatz.de/p/bausatz-diy-retrokonsole-tetris-snake-racing-space-shooter As mine came without a case kit, I designed one in Tinkercad. See thePost-Printing-Section for assembly instructions. Print Settings Printer Brand: Creality Printer: CR-6 SE Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: your choice PLA your choice Post-Printing ============= Assembly is self-explaining.... Just print the two halves, install the PCB in the upper half (three small screws needed - btw: who designes a PCB layout with only 3 mounting holes???). (the screw holes in the upper half are designed kind of slots, so you can adjust the PCB position to align buttons with corresponding holes!) Then use a double-sided adhesive tape to fix the battery holder inside the bottom part. Put both parts together - make sure the TOP marking on the lower parts points to the top, because there is a support column for the PCB in the bottom case to compensate for the missing 4th screw. There you are! PS: I attached a red plastic sheet between case and LED displays to enhance contrast of the display. I salvaged that from a plastic file cover and fixed it with small melting points made with my soldering iron... Category: Electronics