Case/enclousure Anet A8 Plus / Gabinete para Anet A8 Plus

thingiverse

Human: Cabinet for Anet A8 Plus\r\nWhat you will need?\r\nMDF board or similar with 6mm thickness in the following measurements:\r\n2x 60 x 60 cm (Front and Back)\r\n2x 60 x 70 cm (Sides)\r\n2x 61.2 x 70cm (Floor and Lid)\r\n\r\nLeo Madeira, Leroy Merlin cut at a lower price. Local hardware stores should cut cheaper. I spent $80 on MDF raw material in Mauá. Passed first and painted black.\r\n\r\nIn the store, take advantage and ask to cut the doors. Many of them do not make this internal cut and you will have to do it at home or take it to a hardware store. I cut mine with a micro-refinement.\r\nI recommend cutting two 40x40cm doors in front and back and one door on the side, in my case I cut the side at 26x24cm. \r\nI bought from ml the polystyrene doors 3mm (cheaper than acrylic) I used [these hinges](https://www.thingiverse.com/thing:4297369).\r\n\r\nGet the corner brackets specified below [in this link](https://www.thingiverse.com/thing:4539464) and print.\r\n\r\n2x Corner Brackets Type1 front-bottom -> Front of Lid\r\n2x Corner brackets back type 2 top-high Backs of Lid\r\n4x Corner Brackets type 3 bottom optional -> 4 corners of floor\r\n\r\nJust insert the plates into the bracket and the cabinet is assembled.\r\nAdditions:\r\nI'm attaching the moldings for the measures I passed if you want to leave the doors with a nicer face. \r\nThe door latches were inspired by Harry Potter's relics of death\r\nTip: the triangles of Harry Potter's relics print in two colors. Print the first 1mm in white or and the rest in black. \r\nI used [this](https://www.thingiverse.com/thing:3111832) toolbox.\r\nThe filament holder I used [this](https://www.thingiverse.com/thing:2180010).\r\nIf you want to connect a 12v LED strip to the 24v source just follow [this tutorial](https://www.waveformlighting.com/pcb-designs/using-a-12v-led-strip-in-a-24v-system).