Case and Stand for LED Lamp

prusaprinters

<p>This model can be used to place the cheap LED lamps from China on places where no suitable holder is mounted. You can use lamps between 3W and 9W.</p><p>The wires are connected by lustre clamps with the lamps contacts.</p><p>I did not make holes for wires or screws in the holder and the stand because there are too different requirements regarding size and position. Drill the holes by your self in a suitable way</p><p>Edit 2020/07/02: added led-cover_V2.STL with cooling slots</p><h3>Print Settings</h3><p><strong>Printer:</strong></p><p>FIashForge Dreamer</p><p><strong>Rafts:&nbsp;</strong></p><p>No</p><p><strong>Supports:</strong></p><p>No</p><p><strong>Resolution:&nbsp;</strong></p><p>0.1mm and 0.25mm</p><p><strong>Infill:</strong></p><p>100%</p><p><strong>Filament:</strong></p><p>PETG white</p><p><br>&nbsp;</p><p><strong>Notes:</strong></p><p>&nbsp;</p><p>It is recommended to use different print profiles to save time and get a precise outline (see picture).<br>The arrester areas were printed with 0.1mm resolution and 40mm/s, the remaining areas with 0.25mm resolution and 80mm/s.</p><p>In the given orientation all parts can be printed without support.</p><h3>&nbsp;</h3><p>&nbsp;</p><p>Category: Other</p>