Cartesian mount system for the Nimble Flex.

thingiverse

This system is designed to mount the Nimble V3 (also known as the Flex) on a cartesian type printer. There are 6 mount plates for various printers available. The core unit, the Flex_Mount_Cartesian, holds the Flex, the hot end mount, and the fans you choose to use. This whole assembly is mounted to the mount-plate of your choice with only two screws. So you can easily make different print heads and swap them out with just those two screws. Included are 4 different hot end mounts. All hot end mounts use the default hot end cooling fan. The hot end mounts are for the standard Creality hot end (or Microswiss version), the E3D V6, the Mosquito, and the Copperhead hot ends. There are 3 different mounts for part cooling fans included. The 4010 radial fan, as found on the standard printhead, in left-hand and right-hand versions. And a frame and duct to mount a 5015 radial fan. Also included are two BL-Touch mounts, left and right side. All the mounts for the fans and the BL-Touch are height adjustable. Finally, I also uploaded basic DIY versions of the mount-plate, the hot end mount, and the left-hand and right-hand adjustable plates. You can use these to design your own mounts for fans or a specific hot end. **Changelog:** - 1 Initial release. - 2 Added the STL files for the BL Touch mounts - 3 Added the STEP file for the Basic Mount DIY block ** The Zesty Nimble V3** The Nimble Flex offers you the most flexibility in mounting, more than any other direct extruder available. It does all that, despite weighing less than any other extruder. Only 27,5 grams! So get a Flex, and enjoy the flexibility and freedom to print on any printer and with any material. The Nimble is available from [Zesty Technology.](https://zesty.tech)