Carry handle and sunshade knob for Hubsan H501S Transmitter

thingiverse

I got tired of lugging around the transmitter for my Hubsan H501s by its case and inadvertently hitting buttons or switches in the process. The foldable sunshade I chose was great, except for one major flaw: the cover is hard to open because it's flush with the transmitter. So, I designed a carry handle and a sunshade knob to tackle these two problems head-on. To mount the handle, you'll need to drill two holes in the top of the transmitter's back cover. The back cover comes off by removing the four screws on its rear. I used two 3mmx12mm socket head screws that threaded right into the pilot holes on the handle. Keep in mind that all printers are different, so you might need to enlarge the holes slightly. The sunshade knob simply presses onto the sunshade and can be secured with a dab of glue - just try to be neater than I was with it. My advice is to remove the sunshade during the gluing process to avoid getting glue on the transmitter's view screen. Hopefully, you'll find these tweaks useful. The next challenge: finding feet for the bottom so that the transmitter can stand upright without tipping over.