Carrera Go!!! Track Guardrails

prusaprinters

<p>Guardrail for the Carrera Go!!! system 90 degree turn. The 'barrier_curve-45' part attaches to the outer rim of the 90-degrees curve. Two curve parts are connected with a connector part. At the end of the turn an 'endpoint' part can be attached for a smooth ending of the guardrail.</p> <p>Attention: each guardrail part is a little bit too short, there are different endpoint parts to compensate. For example, for a 180-degree turn, use 4 curve parts, 5 connectors, one 'endpoint' and one 'endpoint-180'. Flip one endpoint in your slicer, otherwise they'll all face in the same direction.</p> <p>Update: I moved the location of the connector part, so it doesn't interrupt the car-facing barrier any more. A new set of parts with a 'v2' name is available, unfortunately they are not compatible with the older parts.</p> <p>Also I added 'CarreraGo_TrackSupport_75mm', which I use to create a bridge in the track. It is based on the excellent looping connector at <a href="https://www.thingiverse.com/thing:487860">https://www.thingiverse.com/thing:487860</a></p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div> <p><strong>Rafts:</strong></p> <p>Doesn't Matter</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20%</p></div> <p><strong>Filament:</strong> PRUSA PLA/PETG Various</p> </p></p></p> Category: Toy & Game Accessories