Card Saver I Cardholder Necklace
thingiverse
Be aware of the license associated with these files. Please DO NOT sell (stl files, designs, physical 3d print) without my permission. ----- You wear it around your neck displaying a sports card, TCG card, playing card, ID card, business card, photograph, notes, or anything that can fit inside the Card Saver I semi-rigid card holder. Instructions: After you've successfully printed out the 2 parts: Make sure the square opening of the mount is at the top (this is the top, the side without the square hole is the bottom) when installing the hole/line portion of the mount (be sure to use crazy glue to secure it on the cardholder mount). To find the center when installing the Mounting Hole for the Line, just line up the top "tab" of the Cardholder Mount with the Mounting Hole for the Line and it should be centered when you install the mounting hole for the line on the mount. Important Note: The side with the square hole is considered the "top", this square is to help you easily detach the Card Saver I from the mount by using your finger to push the top portion of the Card Saver I out of the mount. Installation Video of Card Saver I Semi-rigid holder onto the Cardholder Necklace Mount: https://youtu.be/qs8bfbOT4b8 To remove the Card Saver I, just slightly push your finger through the square hole, pushing the card away from the tab, and slide the Card Saver I holder out from the top, it should go out the same way it was inserted. Note: The Card Saver I cardholder might be slightly damaged after installing it on the cardholder mount more than a few times due to the plastic of the card saver not being rigid and flimsy. Recommendation: Use a Card Saver I Semi-rigid Holder that you don't really care for Materials Used: 1. Sand Paper (to sand down sharp edges) 2. Good-performing Crazy Glue (to secure the top portion/hole to the cardholder necklace)--I used Loctite Super Glue 3. 2mm line/rope for the necklace to secure around your neck 4. Card Saver I Semi-rigid Cardholder with a sports card or other card/ornament inside
With this file you will be able to print Card Saver I Cardholder Necklace with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Card Saver I Cardholder Necklace.