Card Holding Coaster

prusaprinters

<p>This coaster is so you can enjoy a beverage and play cards at the same time and not ruin your cards. The coaster part is big enough to fit any cup at a whopping 3.5 inch diameter. There are two card slots in the back. A smaller one and a bigger one depending on your hand size and card thickness. The wall in the middle is to protect your cards from the condensation of the cup.&nbsp;</p><p>This print does not take much filament. You could print this with what you have left on the roll. The file is set up with the inside of the coaster separate. This is so you can place it and put a modifier on it. I modified that piece to print no shells and solid top surface so I cold have the honeycomb infill to collect the condensation of the cup. I set my infill to 10%.&nbsp;</p><p>There could definitely be improvements. So by all means put your own spin on it and enjoy.&nbsp;</p>