Card case

prusaprinters

The “Bottom” part features a latch to slide your RFID card in without it falling out accidentally.The “Top” parts look very impressive if you add a color change just for the last seam on top. The Top_Blank can be customized with own writing or logos or can be left blank.Both halfes are intended to be glued or bolted together by six M2x6 or alternatively M2x4 bolts. If you fancy, you might melt in some threaded inserts first, but i found out that they wont come appart anymore, even if you just set the bolts right in. Since i like the looks of inserts, i put them in anyway. If you do so too, you have to drill the bottom parts holes to ~2.5mm firstIf you dont want to use bolts, just take the “_GLUE” version without holes and glue them shutThis is a Remix of 3dprintsmith awesome design. In the original it is intended to be glued together. In the description it semed to be very sturdy but since i intended to use plain PLA (somewhat notorious dont to be glued well) i added screw holes to the design. Additionally i made the inner side a little more narrow, added a outer chamfer and the latch to the Bottom part.However, i recommend to see the original, because it features some more top covers with different features. You can bolt them later to this Bottom part because they are mostly interchangeable (except the holes of course and this one here is slightly longer on the card slit to accomodate the latch)