Carburetor Adapter Plate with Vacuum For Kohler SV600-3224

prusaprinters

<p>Carburetor Adapter Plate with Vacuum For Kohler SV600-3224</p> <p>by RebelTaz</p> <p>I swapped engines on a Cub Cadet in my shop without thinking it through first. The original blown engine utilized a vacuum operated fuel pump because the tank was in the rear. The engine I was swapping in didn't need a pump since the mower from which it was removed had a gravity feed system. Taking a cue from motorcycle fuel pumps, I decided to try and pull vacuum for the pump from the intake manifold. This engine already had a plastic manifold, so all I had to do was make it a tad bit thicker and add a port into which I could screw a barbed fitting. To my surprise, it worked like a charm!</p> <p>I printed this out of PETG at 0.2mm layer height with 1.6mm walls and 40% infill. To help seal against the gaskets, I smeared high-temp RTV silicone on both faces before installing it. All of the original hardware still fits so nothing else is needed.</p> <hr/> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>TEVO</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Tarantula</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>40%</p></div> </p></p></p> Category: Outdoor & Garden