Carabiner Organization System

prusaprinters

<p>This is the C.O.S.</p><p>I was tired of digging around in boxes, bags, and closets to find the correct climbing gear for the day. With this I can organize my quick draws, locking gates, wire gates, and any other gear.</p><p>Increased width model has 15 holes for gear, loops for a helmet or two, and a hole at the top to hang in the closet. It's a little thicker than the normal width for extra rigidity.</p><p>Normal width model has the same hole count as the increased width model but is a little skinnier for lighter gear and decreased print time.&nbsp;</p><p>The circular model is for larger amounts of gear storage. I would suggest making the Z axis (height of the print) about 1/8" - ¼" shorter, just make sure to unlock scaling when doing so.</p><p>&nbsp;Use at least 25% infill</p><p>If you plan on leaving this in your car, print with ABS or another high glass transition filament.</p><p>If you are going to use it for storage and bringing it to the crag, PLA(+) will do just fine.</p><p>This is not for climbing! Do not use while climbing! This is for mobile/home organization/storage of climbing gear only. &nbsp;</p>