Cap for 5mm LED
thingiverse
small caps to put on your led chains, perfect for christmas. due to the single walled design they should be translucent with almost any filament/color. one cap needs about 13cm of 1.75mm filament. 5mm leds will fit, and if not, just resize it a little bit and print again. +/- 0.1mm i printed them with 0.4mm nozzle with abs. very fast and easy to print. you should have no problems printing 50+ of them in about 1.5 hours. just be careful when pulling them off the build plate, they are fragile! layer height: 2-3mm perimeters: 1 (single walled!) infill: 0% top/bottom thickness: 0 raft: no support: no material: abs use high extrusion temperature for better layer adhesion. print settings printer: ctc dual rafts: no supports: no resolution: 2-3mm infill: 0% notes: perimeters: 1 (single walled!) top/bottom thickness: 0 use high extrusion temperature for good layer adhesion.
With this file you will be able to print Cap for 5mm LED with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Cap for 5mm LED.