Canon Selphy CP900 4 x 6 Postcard Paper Cassette

prusaprinters

<p>I recently bought a second hand Canon Selphy CP900 Photo printer, but it came without a paper cassette. Looking on Ebay revealed that if I could find one it would cost more than i paid for the printer! I couldn't find one on Thingiverse , so I therefore decided to make my own. I believe that this tray is pretty much universal across many of the Selphy range. Let me know if you doesn't fit yours :)</p> <p>This is made in three parts, which need to be printed separately.</p> <p>All three work well in PLA, The Tray and lift plate can be printed flat on the bed, but the top lid proved a challenge. I found the best was to print it upside down with a fancy support pattern. which leaves a nice effect in the catch tray.</p> <p>Once printed and cleaned up the lift tray will flex enough to clip into the two little holes in the middle of the tray in a similar way to the original Canon part.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Wanhao</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Wanhao Duplicator i3 V2</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0.1mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>10%</p></div> <p><strong>Notes:</strong></p> <p>print slow (30mm/s) rnrnprint the tray and liftplate flat on the bed, - no supports neededrnand the lid upside down (hinge lugs uppermost) with support.rn</p> </p></p></p> Category: Camera