Candy Dispenser V2

thingiverse

This is version two of my 3d printable Candy Dispenser. Changes I made: - Bigger and more sturdy Turn Handle to prevent kids from breaking it - There's now three different sized Dispenser Gears for all sizes of Candy - Thinner Hopper Plate to prevent jams - Fine tuning of the coin mechanism to make it more reliable For assembly instructions, refer to the [YouTube video](https://www.youtube.com/watch?v=yYIzFSXBvPQ) or [Version 1](https://www.thingiverse.com/thing:4903096) on Thingiverse. Assmbly pretty much stayed the same for V2 because I added no new parts or anything. It still works with coins that are 23mm in diameter or smaller. All the parts where designed while keeping the limitations of 3d printing in mind. So if you stick to the correct printing orientation, as shown in the picture above, you won't need any supports except for the hopper. Print the turn Handle at 100% infill for increased strength because this part has to withstand the biggest force when the Dispenser is being used. The only thing you need for the assembly are a couple of M3 screws and M3 threaded inserts. I used [these ones.](https://www.amazon.de/DESON-Gewindeeinsatz-Einpressmutter-Kunststoffteile-Warmeinbettung/dp/B089GNXKKV/ref=sr_1_5?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=WPWT6EL6A8RA&dchild=1&keywords=threaded+inserts+m3&qid=1625832143&sprefix=threaded+%2Caps%2C168&sr=8-5) If you have watched the video and still have trouble with figuring out how everything goes together, I suggest you take a look at the CAD model. It is available in the downloadable files. Also I have modeled all the threaded Inserts in the CAD model, so if you are not sure where they go it's easy to figure out from that.