Can-Am Defender Charger Holder

thingiverse

Mounting bracket to hold a Noco Genius 2D battery on the rear of the cab of a 2022.5 Can-Am Defender Limited. Mounts on the rear of the cab, behind the passenger seat, below the engine air filter unit. There are two mounting studs on the rear of the cab that take M6 bolts. I used two M6x20mm stainless button head machine screws with thread lock to secure the mounting base adapter to the cab back wall. Used the screws that came with the Noco Genius to secure the Noco bracket to the adapter bracket. The leads from the charger easily reach the battery area. The positive lead would be stretched very tight to reach the battery positive post, so I attached it to the main relay beside the battery. For my machine, the top relay power connection is the battery connection. Negative lead easily reaches the battery negative post. I slipped some wire guard over the DC leads between the charger and the battery area. AC cord can be easily routed to come out behind the hinge on the passenger door. I printed this in PETG, 0.6mm nozzle, 0.3mm layer height, 50% infill.