
Camera Mount with Cable Guide v.2
prusaprinters
<p>Camera Mount for 25.4 x 25.4 mm aluminium extrusion with cable guide to keep the cable tidy, protected, and out of the way. This is a good snap fit onto the extrusion. I designed the original for use around the Logitech C922 Pro but it works with any other camera with a standard tripod mount. The hole for the mounting screw is deliberately undersized to be drilled out per best customisations. The current mounting screw hole is designed around a M4 cap bolt. </p><p>This print is version 2 of the original mount. I incorporated the mount and the camera plate into one design and added 2mm thickness to the camera mount for use with any webcam and/or action cam. </p><p>I used PET, PLA works fine.</p><p>Additional:</p><p>2x M3 x 14 mm Cap Screws<br>2x Locking Nuts (M3 x 4mm) <br>Felt or like soft material</p><p>N.B. I use M3 x 12mm Cap Head Screws to give a refined tidy finish, they have enough thread but 14-15mm would be easier to wind on initially.</p><p><br>If you like this please consider buying me a coffee: <a href="https://www.buymeacoffee.com/missionrea9">https://www.buymeacoffee.com/missionrea9</a></p><p> </p><p>Edit: added version without cable guides as requested</p><p>Edit: added camera base for adjustability as requested. </p><p>N.B. I made the camera base with square corners as opposed to round corners to facilitate a better tighter grip. When testing I found installing the camera base into the bracket asap after printing gives an almost permanent adhesion. The tolerances are extremely tight making for a very secure bond. No screws required if inserted while still warm and a little malleable.</p><p> </p><p> </p><p>Find the Logitech C922 Pro Privacy Screen here: <a href="https://www.prusaprinters.org/prints/148065-logitech-c922-pro-privacy-shield">https://www.prusaprinters.org/prints/148065-logitech-c922-pro-privacy-shield</a></p><p><br> </p><p>Find the Logitech C922 Pro Privacy Screen here:<br><a href="https://www.prusaprinters.org/prints/148079-logitech-c922-pro-camera-mount-with-cable-guide">https://www.prusaprinters.org/prints/148079-logitech-c922-pro-camera-mount-with-cable-guide</a></p><p> </p><p> </p><p> </p>
With this file you will be able to print Camera Mount with Cable Guide v.2 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Camera Mount with Cable Guide v.2.