Camera Handle Pistol Grip Handheld Stabilizer

thingiverse

Have you ever wished to print a camera grip instead of buying a camera grip? This is it. Standard 1/4"-20 thread 3/8" length hex bolts accepted. Thumbwheel included with print (so you don't have to tighten everything by hand or with a wrench). Insert screw (m2x8) optional but highly recommended. Print Settings Printer: Generic Kossell Rafts: No Supports: Doesn't Matter Resolution: .2mm is enough Infill: 25%+, pistol grips feel better in the hand with extra weight Notes: please note that this grip can be printed without supports or printed filament cooling, but you may have minor deformation of the grip on the bottom side. This is okay for most peoples' hands, and I haven't found it to be an issue. This also slightly increases the chance for print failure due to collision (overhands tend to warp upwards); be careful when printing the bottom half of the grip. (this is a minor word of caution, and it is very acceptable to do something else while this is printing) Post-Printing Parts Needed 1/4"-20 thread, 3/8" length hex bolthttps://www.mcmaster.com/#92240a535 M2 thread, 8mm length pan head machine screwhttps://www.mcmaster.com/#92005a029 (Optional) Adhesive-backed 60A Durometer 1/32" thick Neoprene Rubber with crisscross texture (doesn't have to be exact)https://www.mcmaster.com/#8445k61 Assembly Group the hex bolt with the thumbwheel Inserting the group into the handle Push the threaded portion of the hex bolt out of the hole in the handle. Make sure you align the hex head with the cutout on the thumbwheel. You can either glue in or screw in the insert. (Optional) You can attach buy some rubber to secure the camera better and ease disassembly How I Designed This Autodesk Inventor 2017 Student Edition Handle: lots of sketches one loft mirrored loft lots of crying Youtube Video