Camera Gear Holder V3

thingiverse

Camera gear storage option to keep gear from rolling around/etc. This is an upgraded version from this https://www.thingiverse.com/thing:4932999 (there is no V2, that never made it to print stage). These use universal bases in 3 sizes 60mm, 120mm & 180mm which you print in PLA along with the screws (which really probably aren't necessary) and connector to connect the bases together. I recommend printing the connectors at 100% infill but the rest can be done at 20% infill. Then the rest of the actual files you print in TPU so the gear has a nice surface to be against instead of using foam like the previous version. The bases are universal so you don't have to get rid of the entire thing if you sell/upgrade your gear, only print the TPU inside. Bases: - 60mm - 120mm - 180mm - 240mm (untested) - Filter (For filters in their individual case for most cases) Inserts are available for the following: - 14EXT (Macro Flash); 120mm base - 430EX III RT (Canon Flash); 120mm base - Control Ring Mount Adapter EF-EOS R (Canon adapter); 120mm base - EF 16-25mm 2.8L III (Canon lens); 120mm base - EF100mm 2.8L (Canon lens); 120mm base - MP-5 65mm 2.8 1-5x (Canon lens);120mm base - EOS R5 w/waka Rapid Camera Neck Strap; 180mm base - Gilumi LED light (and battery and charger); 180mm base - Godox X Pro C (Wireless transmitter); 60mm base - Godox X R2 (Flash); 120mm base - GoPro Hero 5; 60mm base - LHE6N (Canon battery/fits 2); 60mm base - RF 24-70mm 2.8L (Canon lens); 120mm base - RF 70-200mm 2.7L (Canon lens); 120mm base - RF 85mm 1.2L (Canon lens): 120mm base - RF 100-500mm 4.5-7.1L Full (Canon lens); 240mm base (untested) - RF 100-500mm 4.5-7.1L Part 1 (Canon lens); 120mm base - RF 100-500mm 4.5-7.1L Part 2 (Canon lens); 120mm base - Ricoh Theta V w/Sleeve (360 camera); 60mm base - Zoom H1n (audio recorder); 60mm base