Caliburn upgrade to use OD: 40mm ID: 36mm (metric) aluminium plunger tube including the new takedown magwell design
thingiverse
CHANGE NOTE 01/18/19 - Updated the thing to the latest version 3.5 of Caliburn using the new MilanCoupler, which holds up much better with the enlarged connection to EliteUpper. Also included a ramrod base as requested. However, I didn't test this part, so be aware to test it yourself. CHANGE NOTE 10/28/18 - Added MilanCouplerC with an ID of 40mm. The default MilanCoupler keeps breaking after some period of use. CHANGE NOTE 09/03/18 - Updated to enable using a 40/36mm tube in the new takedown magwell design of Caliburn by Captain Slug. I used M5 thread pins for the magwell pins. It's recommended to print the MilanCoupler at 100% infill. ORIGINAL SUMMARY I created the Caliburn blaster for myself and my son, but couldn't find a suitable tube diameter. Therefore, I modified the included parts to fit a tube with an outer diameter of 40mm and an inner diameter of 36mm. The o-ring used for a tight seal with the tube is a ring of 29.4x3.1mm with a hardness of 70 shore. This design is very nice!
With this file you will be able to print Caliburn upgrade to use OD: 40mm ID: 36mm (metric) aluminium plunger tube including the new takedown magwell design with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Caliburn upgrade to use OD: 40mm ID: 36mm (metric) aluminium plunger tube including the new takedown magwell design.